|
Ballard Technology sells a variety of cables and accessories to complement our wide range of avionics databus interface products. If you have any questions about the cables and accessories listed below, please contact us.
|
|
|
 |
OmniBus®
|
 |
 |
Part Number: 16035
3-ft. cable from 60-pin Molex® LFH connector to 60-pin Molex LFH connector.
Part Number Variations: "/10" suffix 10-ft. cable
(Optional) |
|
 |
Part Number: 16036
Recommended for ARINC 429/708/717, CSDB, serial, and discrete IO protocol modules
3-ft. cable from 60-pin Molex LFH connector to two male 25-pin D-subminiature connectors.
Part Number Variations: "/10" suffix 10-ft. cable |
|
 |
Part Number: 16037
Recommended for two channel MIL-STD-1553 protocol modules
3-ft. cable from 60-pin Molex LFH connector to four MIL-STD-1553 twinax cables with PL75 connectors and one female 25-pin D-subminiature connector.
Part Number Variations: "/10" suffix 10-ft. twinax and D-sub cables |
|
 |
Part Number: 16038
Recommended for two channel MIL-STD-1553 protocol modules
3-ft. cable from 60-pin Molex LFH connector to four MIL-STD-1553 twinax cables with PL75 connectors.
|
|
 |
Part Number: 16039
Recommended for one channel MIL-STD-1553 protocol modules
3-ft. cable from 60-pin Molex LFH connector to two MIL-STD-1553 twinax cables with PL75 connectors and one female 25-pin D-subminiature connector.
Part Number Variations: "/10" suffix 10-ft. twinax and D-sub cables |
|
 |
Part Number: 16041
Recommended for one channel MIL-STD-1553 protocol modules
3-ft. cable from 60-pin Molex LFH connector to two MIL-STD-1553 twinax cables with PL75 connectors.
|
|
Notes on OmniBus cables (16035-16041):
- Custom lengths may be ordered for all OmniBus cables. Contact Ballard for availability.
- One cable is needed for each core (except for empty core, P/N 000). P/N XX1 = 1 core, P/N XX2 = 2 cores, P/N XX4 = 4 cores (OmniBus VME only)
- All twinax cables are wired for transformer coupling.
- The D-sub associated with twinax cables has only the non-bus signals (discretes and IRIG).
|
|
Top
 |
BUSBox®
|
 |
 |
Part Number: 16032
Dual-protocol BUSBox adapter cable assembly. Includes two 3-ft. MIL-STD-1553 twinax cables with PL75 connectors and one 1-ft. cable with a male 25-pin D-subminiature connector for ARINC 429, ARINC 717, trigger, and sync signals.
(Optional) |
|
|
|
Top
 |
MIL-STD-1553
|
 |
 |
Part Number: 16011
3-ft. MIL-STD-1553 twinax cable, CM1553 I/O connector, transformer coupled, 78-ohm, with PL75 connectors.
(Included with CM1553-3 & CM1553-1 products) |
|
 |
Part Number: 16012
1-ft. MIL-STD-1553 twinax cable, CM1553 I/O connector, direct coupled, 78-ohm, with CJ70 connectors.
(Optional with CM1553-3 & CM1553-1 products) |
|
 |
Part Number: 16013 (6-ft)
Part Number: 16014 (10-ft)
Part Number: 16015 (25-ft)
MIL-STD-1553 twinax cable, 78-ohm, with PL75 connectors.
(Optional General-Purpose) |
|
 |
Part Number: 17001
MIL-STD-1553 78-ohm terminator without chain. Mates with BJ77 or equivalent.
(Optional General-Purpose) |
|
 |
Part Number: 17002
MIL-STD-1553 tee adapter. Mates with BJ77 or equivalent and two PL75s or equivalent.
(Optional General-Purpose) |
|
 |
Part Number: 17003
MIL-STD-1553 barrel adapter. Mates with two PL75s or equivalent.
(Optional General-Purpose) |
|
 |
Part Number: 17011
MIL-STD-1553 transformer coupler, 1 stub, BJ77 connectors that mate with PL75 connectors or equivalent.
(Optional General-Purpose) |
|
 |
Part Number: 17012
MIL-STD-1553 transformer coupler, 2 stub, BJ77 connectors that mate with PL75 connectors or equivalent.
(Optional General-Purpose) |
|
|
Top
 |
ARINC 429
|
 |
 |
Part Number: 16016
1.5-ft. interface cable with CM429-1 I/O connector and 15-pin male D-sub.
(Included with the CM429-1 product) |
|
 |
Part Number: TMV-1
VME card transition module. Provides front panel access to the ARINC 429 databus connections and ribbon cables for connection to the VME429-1.
(Optional with the VME429-1 product) |
|
|
Top
 |
ARINC 717
|
 |
 |
Part Number: 16020
Handheld tester laboratory cable; US standard power cord and female D-sub signal connector.
(Optional with the HT717-1 product) |
|
 |
Part Number: 16021
12-ft. handheld tester aircraft cable for Boeing 737, 757, and 767. Connects to Flight Data Recorder system test plug. Uses aircraft power.
(Optional with the HT717-1 product) |
|
|
Top
 |
ARINC 629
|
 |
 |
Part Number: 16006
6-ft. stub cable with D-sub and MIL-C-26500 plug. Connects to a current mode coupler.
(Optional with the PC629-1 product) |
|
 |
Part Number: 16007
6-ft. pseudo-coupler cable with D-sub and MIL-C-26500 receptacle, and built-in circuit to replace coupler (connects SIM-to-SIM). Connects PC629-1 to user application.
(Optional with the PC629-1 product) |
|
 |
Part Number: 16008
12-ft. pseudo-coupler cable with two D-subs and built-in circuit to replace coupler (connects SIM-to-SIM). Connects two PC629-1 cards.
(Optional with the PC629-1 product) |
|
 |
Part Number: 16009
12-ft. pseudo-bus cable with two D-subs. Connects two PC629-1s using a pseudo-bus (voltage mode).
(Optional with the PC629-1 product) |
|
|
Top
 |
Miscellaneous
|
 |
 |
Part Number: 31020
Ruggedized strain relief assembly for Type III PCMCIA cards. Fits around cable and screws to card.
(Included with CM429-1, CM1553-1 & CM1553-3 Type III products) |
|
|
|
Top
 |
Custom
|
 |
Please contact Ballard to discuss your custom cabling requirements.
Ballard Technology, Inc.
11400 Airport Road, Suite 201
Everett, WA 98204
USA
toll-free: (800) 829-1553
phone: (425) 339-0281
fax: (425) 339-0915
Contact us via our online support form
|
|
|
Top
|
|